Flux-Calcined Diatomite Filler

  Main purposes：

Pesticides, chemical fertilizers, coatings, plastics, rubber, toothpaste, abrasives, cosmetics, ceramics, polishing materials, centrifugal casting tube film remover and other industries.

  Manufacturing description：

This product uses high-quality diatomite ore with SiO2 greater than 85%. After drying, crushing and early sorting, it is calcined in a dynamic rotary kiln at a calcination temperature of 850-1150 degrees. Part of the cosolvent is added in the calcination process. After calcination, the classification sorter is used for fine sorting, and then the airflow crusher and classifier are used for fine sorting in the later stage. After passing the inspection by the quality inspector, it is warehoused.

  Storage conditions：

During storage, the products shall be protected against rain, moisture, sun and corrosion. When stacking, the products shall not be directly in contact with the ground, but shall be stacked on pallets or moisture-proof felt plates. The stacking layer height shall not exceed 30 layers.

  Cautions during transportation：

Prevent rain during transportation, and do not transport with polluting, corrosive or sharp metal objects. Handle with care during loading and unloading, do not drop directly from high places, and do not use iron hooks and other hard objects to hook and lift, so as to ensure that the outer packaging is intact..

  Package specification and material：

20kg film coated plastic woven moisture-proof bag, 20kg paper plastic composite bag or three-layer kraft paper bag, 500kg container bag or other packaging specifications required by customers.

  Product expiration date：

36 months.

  Product main technical parameters： 

Remarks：
1. This product is easy to produce dust when in use. Please pay attention to the protection of dust. Please refer to the MSDS of the product for details.
2. The above product indicators are typical indicators, allowing general fluctuations during production. If you need to know more detailed technical indicators, please contact our relevant personnel for confirmation.
3. The above product models are some of our product models, which cannot be displayed one by one due to the limited layout. We can provide more and more sophisticated products according to the needs of different customers.